Prints out an ascii chart using builtin bash! Then formats using cat -t and column. The best part is: echo -e "${p: -3} \\0$(( $i/64*100 + $i%64/8*10 + $i%8 ))"; From: http://www.askapache.com/linux/ascii-codes-and-reference.html Show Sample Output

If you have a client that connects to a server via plain text protocol such as HTTP or FTP, with this command you can monitor the messages that the client sends to the server. Application level text stream will be dumped on the command line as well as saved in a file called proxy.txt. You have to change 8080 to the local port where you want your client to connect to. Change also 192.168.0.1 to the IP address of the destination server and 80 to the port of the destination server. Then simply point your client to localhost 8080 (or whatever you changed it to). The traffic will be redirected to host 192.168.0.1 on port 80 (or whatever you changed them to). Any requests from the client to the server will be dumped on the console as well as in the file "proxy.txt". Unfortunately the responses from the server will not be dumped. Show Sample Output

Check if port is open, if you don't have ncat on your machine. Show Sample Output

Changes standard mysql client output to 'less'. In another words makes query results of mysql command line client to look much better.

Greps IRC logs for phrases and lists users who said them. Show Sample Output

If you are using an xterm emulation capable terminal emulator, such as PuTTY or xterm on Linux desktop, this command will replace the title of that terminal window. I know it is not nice to have seventeen terminals on your desktop with title PuTTY, you can not tell which one is connected to which server and doing what. Even though the string between the quotes is typed as literals, it needs a little more finesse to make it work. Here is how it is done key-by-key: echo "( ctrl-v then ctrl-[ )0;Enter_Title_String_Here( ctrl-v then ctrl-g )"( enter ) ctrl-v : means hold down ctrl key and hit v at the same time like you are pasting in windoze ; also please don't type the parentheses, i.e., ( and )

grep ERROR *.log -bash: /bin/grep: Argument list too long echo *.log | xargs grep ERROR /dev/null 20090119.00011.log:DANGEROUS ERROR

slashdot.org webserver adds an X-Bender or X-Fry HTTP header to every response! Show Sample Output

AFAIR this is the wording ;)

You're behind on your TV catch-up, but how far behind? This command tries to open mplayer against all files in the current dir. If it's a video file it will contain ID_LENGTH, which is summed and output in hours, minutes and seconds. Someone better at awk could probably reduce this down a lot. Show Sample Output

This command will disable the beep sound from the PC speaker.

Calculates the size on disk for each package installed on the filesystem (or removed but not purged). This is missing the | sort -rn which would put the biggest packges on top. That was purposely left out as the command is slightly on the slow side Also you may need to run this as root as some files can only be checked by du if you can read them ;) Show Sample Output

Strip my code to: wmctrl -o 0,0 # autorotates to the first face. In fact [0-1279],0 wmctrl - 1280,0 # goes to the second face wmctrl -o 2560,0 # goes to the third face, and so on. # Use multiples of the horizontal display resolution. My example work for 1280x800 display, been 1280 the number of interest. Tweak the number, try a biiiig one and see your cube spinning... I put a complex example to show how fun things can be, even for my ademco and paradox alarm central network advisor interface xpto etc. It rotates two faces, print the alarm message, and goes back tho where it was. Tested on BIGLINUX 4.2, equivalent to ubuntu LTS hardy. Do not forget to activate 3D efects ( compiz cube ) Show Sample Output

if you still get a permissions error using sudo, then nano the file: sudo nano -w /sys/block/sdb/queue/rotational and change 1 to 0 this thread: http://www.ocztechnologyforum.com/forum/showpost.php?p=369836&postcount=15 says that this will "help the block layer to optimize a few decisions"

A bit different from some of the other submissions. Has bold and uses all c printable characters. Change the bs=value to speed up and increase the sizes of the bold and non-bold strings.

If you want edit your sqlite database in any uft8 supported editor, you can dump whole sqlite database to plain text.

this also generates errors (change 4 to higher number for more mistakes)

See http://code.google.com/apis/analytics/docs/concepts/gaConceptsCookies.html if you are unclear about the Google Analytics cookie system. If Firefox is your daily browser, be a good Orwellian and run this command regularly. If you see, 'SQL error near line 1: database is locked', close Firefox and run again.

Pure Bash This will print a row of characters the width of the screen without using any external executables. In some cases, COLUMNS may not be set. Here is an alternative that uses tput to generate a default if that's the case. And it still avoids using tr. printf -v row "%${COLUMNS:-$(tput cols)}s"; echo ${row// /#} The only disadvantage to either one is that they create a variable. Show Sample Output

This command will format your alias or function to a single line, trimming duplicate white space and newlines and inserting delimiter semi-colons, so it continues to work on a single line. Show Sample Output

the block of the loop is useful whenever you have huge junks of similar jobs, e.g., convert high res images to thumbnails, and make usage out of all the SMP power on your compute box without flooding the system. note: c is used as counter and the random sleep r=`echo $RANDOM%5 |bc`; echo "sleep $r"; sleep $r is just used as a dummy command. Show Sample Output

If you're going to use od, here's how to suppress the labels at the beginning. Also, it doesn't output the \x, hence the sed command at the end. Remove it for space separated hex values instead Show Sample Output

this oneliner uses make and it's jobserver for parallel execution of your script. The '-j' flag for make defines number of subprocesses to launch, '-f' tells make use stdin instead of Makefile. Also make have neat flag '-l', which "Specifies that no new jobs (commands) should be started if there are others jobs running and the load is at least load (a floating-point number)." Also you can use plain Makefile, for better readability: targets = $(subst .png,.jpg,$(wildcard *.png)) (targets): echo convert $(subst .jpg,.png,$@) $@ all : $(targets)